If outside, ensure the wood, bolts, screws, and glue are suitable. Is the bench / picnic table going to be used inside or outside? The task ahead simply involves cutting the pieces to length, cutting the angles and rounds on the pieces that need it (strictly adhering to the dimensions given in the plans), drilling through the pieces that need it, assembling the frames, and then last but not least – adding the seats, tabletop, and a bit of bracing. By applying that rule you can make the unit as long or as short as you want – within practical reason of course. Making the table longer or shorterĪpply the same rule as above regarding the length of the seat boards and the length of the tabletop in relation to one another. Therefore 76 mm (3″) will be the difference between the length of the front (longer) seat board and the length of the tabletop. Likewise, the difference in length between the tabletop and the longer (front) seat board is the sum of the thickness of four framing pieces.įor example, if the framing pieces are 19 mm (¾”) thick, four times that is 76 mm (3″). Therefore 76 mm (3″) will be the difference between the length of the front (longer) and rear (shorter) seats boards. The difference in length between the shorter (rear) and longer (front) seat boards is the sum of the thickness of four framing pieces.įor example, if the framing pieces are 19 mm (¾”) thick, four times that is 76 mm (3″). The bolts (there are only four) will need to be long enough to go through two (frame piece) thicknesses. Using wood with a different thicknessĬhanging the stock thickness (of that used in this project) will impact on the length of the bolts and also the difference between the lengths of the seat boards and the length of the tabletop in relation to one another. Or, if you want to add some protection from the winter weather whilst your table is out of action, our wide range of garden furniture covers have got you (and your table) covered.If you use 38 mm x 19 mm (¾” x 1½”) stock in place of the 45 mm x 19 mm (¾” x 1¾”) stock used here, make the following changes:ġ.) Make the diameter of the template (referred to in Step 1) 38 mm (1½”).Ģ.) Cut pieces & (the rear legs) 9 mm (⅜”) shorter than stated in the plan drawings.ģ.) Pieces (the leg stops) will need to be a little bit longer but it’s easy enough to check the measurements when you are up to that step. If you’re looking to add some shade throughout the summer months, an outdoor parasol could be the perfect addition to add to your picnic table seating area. What’s more, each and every member of the family can enjoy the comfort of these tables as some have been specially crafted with wheelchair access, some specifically for juniors, and even some with activities incorporated for the gaming enthusiasts. With a variety of shapes, sizes, and colours to choose from, our range of picnic tables offer a magnitude of possibilities for adding that unique piece to your garden furniture collection. Traditionally designed with flat bench seating and a sturdy build, a number of guests can use the table at once to dine, play games, and simply enjoy the fresh air and surroundings. A picnic table will make a great addition to any outdoor space, allowing users to sit together and make the most of the great outdoors.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |